AFTER YOU BY A DID NUMBER (VoIP Trunk Settings)

Service-Smart-Phones.jpg

To Buy a New Phone Number (DID)
From your Portal, select "Phone Number" tab, then select "Buy New Number". then follow the information on the screen, you may select from the list or enter the area code to search.

How To Setup Failover for Incoming Phone (DID) Number:
From your Portal, Click on "Phone Number" and select "List My Number" then select (in red) "Add a Failover Number to DID" then select the Phone number from the list of Numbers on left that you would like to add the failover number to, then edit the list and enter your 11 digit phone number of your cellphone e.g. 15551234321 do not enter any spaces or dashes, then click the "Add Number". To forward your number to a International number just add 011 plus the country code and number.

NOTE: In the "Enter Destination" field, the number must be 11 digits and you should change the PRIORITY from the drop down box (i.e.) "Priority : 2" it must be higher than "Priority : 1" (1 is always your first/primary destination). By default we will use your cellphone or a number you provide as your "backup number" during the signup process.

How To Setup Call Forwarding for Incoming Calls on Your Device (Home Accounts only):
From your Portal, Select the "My Settings" tab then click on "Manage Device" and login with your username and password. In the "Call Forwarding" window select the appropriate tab and enter your
11 digit phone number  in the following format e.g. 15551234321 (do not enter any spaces or dashes). To forward your number to an International number just add 011 plus the country code and number.

For Software App, use the following URI format: (SIP/5551231234) the 5551231234 would be the same username/Number that you used to sign in to your mobile-app.

Trunk Settings OnlyWhat is SIP Trunking? ⋆ Sangoma

Edit the Template for the New Phone Number (DID) on a Server/PBX/SIP Trunk use the following format:

For Software App, use the following URI format: (SIP/5551231234) the 5551231234 would be the same username/Number that you used to sign in to your mobile-app.

NOTE: if you are a Wholesale/Reseller Customer, use the "SIP/[email protected]:5062" and Port replace the "15551231234" with your DID number. AFTER you have setup your SIP Trunk.

How to Setup SIP Trunk On YOUR server:
Create (cut and paste) all trunk by adding the following information below:

DID SIP TRUNK:
host=mordid.mvnoserver.com
Port=5062
context=from-trunk
type=friend

IAX2 TRUNK:
host=did.mvnoserver.com
Port=50990
context=from-trunk
type=friend

-------------

SIP/DID TRUNK (this is for OUTBOUND Call Termination using GTI as your provider)
host=mordid.mvnoserver.com
Port=5062
context=from-trunk
type=friend
---------------------------

How do I tell which SIM & Phone Numbers (DID) are assigned to which Trunk?
Select "Phone Number" and select “List My Number(s)” button to view your DIDs and their corresponding destination trunks. If you have self managed services, you may also edit the destination from this screen.

What dialing format should I use to send calls? Please send calls in e164 format country code + area code + number
What audio codec does GTI support? We support G.711u, G.729. Use G711 (ulaw) for Mobile Service